More Information About Brakes Squealing

If you’re lucky, the squealing (or squeaking) noise that your brakes make when you first drive your car in the morning, particularly after rain or snow, is just surface rust being scraped off the rotors by the pads the first few times you apply the brake pedal, or the result of moisture and dirt that collects on the rotors, including from condensation caused by high humidity. If it goes away after a few brake applications, no worries.
If the noise persists most times or every time you apply the brakes or stays on continuously while you’re driving, the cause is more serious — and the fix will be more expensive.
A continuous high-pitched squeal while you’re driving is usually the sound of a built-in wear indicator telling you that it’s time for new pads. As the pads wear down and get thinner, a small metal tab contacts the rotor like a needle on a vinyl record to warn you it’s time for new pads. (Some wear indicators may work differently and engage only when you apply the brakes.)
Other squeals and squeaks will require a brake inspection to diagnose, and may require cleaning, lubrication or adjustment, and possibly new parts. Most brake noise is caused by worn or loose parts.
For example, an unevenly worn rotor (often referred to as “warped”) won’t let the brake pads press flat against the rotor when you apply the brakes, and that can create vibrations that generate noise. Likewise, an unevenly worn pad won’t press tightly against the rotor and may chirp. Another possibility is that the pads are loosely mounted, or the shims that hold them in place have corroded or become loose.
And then there are the pads themselves. Some mechanics warn that bargain-bin pads are more likely to be noisier than higher-quality, more-expensive pads. In addition, loose or sticking calipers can contribute noise.
Because there are several possibilities, and because brakes are a crucial safety feature, it is best to have a pro diagnose noise.
A grinding sound usually means that the pads have worn away, and now the backing plates on which they were mounted are being squeezed against the rotor. This metal-to-metal contact means that you will need to replace the rotor as well — and that you probably ignored some earlier warning signs of brake wear.

Shoud Know How Often Do I Need to Change My Brake Fluid

The recommended intervals for changing brake fluid are all over the board depending on the manufacturer, from as often as every two years to never. Really.
For example, Chevrolet says to change the brake fluid on most models every 45,000 miles, but Honda says to do it every three years regardless of the vehicle’s mileage. Three years is also the recommended interval for most Volkswagens, but Mercedes-Benz vehicles typically call for fresh fluid every two years or 20,000 miles.
In contrast, on the Ford Escape, Hyundai Elantra, Toyota Camry and other models from those manufacturers, there are no recommendations for replacing the brake fluid, only instructions to inspect it periodically.
This leaves it up to the owner to consult what the manufacturer says in their car’s maintenance schedule and rely on the advice of a trusted repair shop.
Brake fluid lives in a sealed system and can survive for years, but moisture from the surrounding air can work its way in through hoses and other parts of the brake system. Water in the brake lines lowers the boiling point of the fluid, so stopping ability can diminish in hard stops as heat in the system increases. In addition, over time the moisture can cause internal corrosion in the brake lines, calipers, the master cylinder and other components.
Flushing and replacing brake fluid might cost $100 or less on many vehicles, but replacing rusted brake lines and other parts can run several hundreds of dollars, so clearly there’s value in keeping up with maintenance.
As a rule of thumb, it’s wise to have the brake fluid inspected and perhaps tested for moisture content every few years and no more than every five if you live in a high-humidity area.
You might be able to tell it’s time for a change by looking to see if the fluid is still fresh. Brake fluid is often light brown in color, but in some vehicles it’s clear (at least when new) and will darken with age, becoming murky from water contamination. A better way is to have it tested by a professional for moisture and see what they recommend.
Brake fluid is as vital to stopping a vehicle as engine oil is to keeping it going, but it doesn’t get as much attention as it deserves.

Know More About Oil for High-Mileage Engines Worth the Extra Cost

Most major oil brands market oil made specifically for engines that have more than 75,000 miles of wear, claiming that additives help reduce engine wear and provide anti-aging benefits. They are often a blend of synthetic and petroleum-based oils, and they typically cost at least a couple of dollars more per quart than conventional oils.
But are they worth the extra dough?
Some oils may be more beneficial than others because they contain conditioners purported to rejuvenate seals to prevent or stop oil leaks, a common ailment in engines with a lot of miles on them.
Internal seals and gaskets become brittle and shrink as they age, allowing oil to seep by. Sometimes this becomes visible as oil stains on a garage floor or as streaks of oil on lower engine parts. When valve-guide seals wear, oil can leak into combustion chambers and the engine will literally start burning oil. With small leaks, blue smoke from burning oil may not be visible from the exhaust, but your oil level will probably drop below the full mark on a regular basis.
The seal conditioners found in some high-mileage oils may reduce or eliminate small leaks and seepage by rejuvenating seals to their original size and shape. If an engine isn’t burning or leaking oil, or if it uses, say, less than a quart over 6,000 miles or so, switching to high-mileage oil may not be worth the extra cost for you. It’s really a judgment call if you should pay more for high-performance oil when your car has 100,000 miles on it but is using little or no oil. It doesn’t hurt and it could prevent leaks from starting. Most vehicle manufacturers would say it’s normal for an engine to consume some oil between oil changes.
In addition to having seal conditioners, high-mileage oils usually boast more detergents designed to clean out sludge inside the engine, plus other additives meant to reduce wear on moving parts. Every oil, though, makes similar claims that it does great things inside an engine.
Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W30 instead of 5W20 — or using oil additives to stop oil leaks. Thicker oil makes an engine harder to start in cold weather, reduces oil circulation around the engine and increases oil pressure, which means there will be more pressure trying to push the oil past seals and gaskets.

Should Know How Often Should Tires Be Balanced

Smooth driving is a balancing act that requires getting the wheels and tires to rotate at high speeds without vibrations. That’s not a slam dunk; a dirty little secret about wheels and tires is that they usually aren’t perfectly round, even when brand new. What’s more, their weight often isn’t evenly distributed, so they’re heavier in some spots than others.
Either issue can cause annoying vibrations. Out-of-balance tires can also cause rapid tire or suspension wear, so it’s not just about ride comfort.
That is why when new tires are mounted on wheels they’re spin-balanced to detect vibrations. Some vibrations can be eliminated by rotating the tire on the wheel so the heavy or “high” spot is in a different location that better matches up with the wheel. Small weights are attached to the wheels with adhesives or clips to counteract the heavy spots and provide a smooth ride. Over time, though, the weights can fall off. If that happens to a front wheel, you may feel vibrations through the steering wheel that typically become more pronounced as vehicle speed increases.
Many tire dealers include free lifetime rotation and balancing with new tires (something you should ask about before buying). Tire rotation is when the vehicle’s tires are removed and reattached at a different position to ensure they wear evenly, which should be done every 5,000 to 7,500 miles on most vehicles, or according to the automaker’s recommendation.
Many consumers neglect the balancing part and have their tires rotated only periodically. If balancing was included with the tires, it would be wise to remind the shop to check the balance at the same time. Even if balancing costs extra, it’s a good idea to have it checked at least every two years, or more often in areas where roads are not well-maintained.
Vibrations can also be caused by a bent wheel, a damaged tire (which won’t be fixed by balancing), worn suspension parts or worn wheel bearings, so balancing the wheels and tires may not eliminate all vibrations.
Tires and wheels are balanced before being attached to the vehicle by spinning them on a balancing machine that identifies heavier or stiffer spots that cause vibrations. Some tire dealers and repair shops use “road force” balancing machines that simulate the weight and forces applied to tires and wheels during driving conditions. They say this method provides more accurate and detailed readings that allow more precise balancing.

Simple Tips To Properly Check and Fill Tires

While it may seem like a mundane task, inflating tires is much more crucial to your car than you may think, and it results in a safer and more economical experience on the road. Your vehicle’s handling also will be greatly improved as the larger a tire’s inflated footprint, the more responsive and comfier the ride balance will be.

Because it’s National Tire Safety Week, it’s the perfect time to check your car’s tires.

Before starting

To find your tires’ proper inflation level, look for a sticker on the driver-side doorjamb. It displays the vehicle weight restriction and tire information. The info is also found in the maintenance or car-care section of your vehicle’s owner’s manual.

Don’t refer to the sidewall markings on your tires, which in part specify the maximum tire pressure — not the recommended pressure.

Unless your tire is visibly flat, don’t judge tire inflation just by looking at it; you have to use a tire pressure gauge to get the correct pounds per square inch reading. There are three types of tire-pressure gauges: digital, internal slide and dial. Prices range from $5 for a basic gauge to more than $30 for one that is digital, has an air-release button — or even talks. All will do the job, but you may want to consider the conditions in which you’ll be using your gauge. “We’ve found that low-cost digital pressure gauges are very accurate and maintain the accuracy longer, but in extremely cold temperatures the gauge may not show up properly,” said John Rastetter, Tire Rack’s director of tire information services.

Tips for checking and filling your tires

Tire manufacturers suggest checking tires when they’re cold for the most accurate reading. Outside temperatures can cause tire pressure to vary by as much as 1 psi per 10 degrees; higher temperatures mean higher psi readings. “Tires are black; what does black do? Attract heat,” Rastetter said, noting the importance of finding a shady place to check and fill all four tires.

Temperature plays a huge part in tire psi, Rastetter said, adding that the most crucial time of year to check pressure is in fall and winter when days are shorter and average temperatures plummet.

Check your tires in the morning before going anywhere, because as soon as you get behind the wheel for an extended amount of time, psi will rise. Rastetter said that if you’ve been on the road a long time and notice higher psi in your tires, don’t let the air out, as the increase in pressure has built up due to the warm, constantly-in-motion tires

What to do

1. Pull your car onto a level surface in the shade.
2. Remove dust caps from the tires’ valve stems.
3. Using your tire gauge, firmly press the tip of the gauge straight on to the tire’s valve stem for a brief moment.
4. The tire gauge should provide a psi reading; if the number seems unrealistically low or high — for example, 85 psi or 1 psi – you will need to repeat the previous step, ensuring that the tire gauge’s tip is properly making contact with the valve stem.
5. If the tire gauge’s recorded reading is higher than the manufacturer-recommended rating, press the gauge tip on the valve stem until you hear air leak out. Check the tire pressure again.
6. If the reading is lower than recommended, fill the tire with air by firmly pressing the air-hose tip onto the valve stem. You will hear air quietly enter the tire. If you hear air leaking or spraying out, you need to double-check that the connection between the air hose and the tire’s valve stem is secure.
7. When you think you’ve added or let out enough air, check the pressure a few times with the gauge.
8. Replace the valve dust caps. Rastetter emphasized the importance of keeping dust caps on during winter driving because if water gets into the valve stem and freezes inside the tire, it could cause a flat.